The best entry
Aluminum (heat-resistant)
Performance chart
8.490,00PHP VAT included
Power increase 15 kW
Power increase 20 HP
Torque increase 48 Nm
Savings: up to 0,8 liters per 100km
Maximum power
Aluminum (heat-resistant)
Performance chart
17.940,00PHP VAT included
Power increase 22 kW
Power increase 30 HP
Torque increase 69 Nm
Savings: up to 1,2 liters per 100km
The price-performance killer
Aluminum (heat-resistant)
Performance chart
10.740,00PHP VAT included
Power increase 19 kW
Power increase 26 HP
Torque increase 60 Nm
Savings: up to 1 liters per 100km
By pressing the + and - buttons on the PedalBox, you can adjust the response of your throttle pedal and change the performance level of your chiptuning. PedalBox and PowerBox always stay connected and respond immediately at the push of a button.
No tedious connection via Bluetooth and no tedious digging out a smartphone - just always connected and ready for use!
A push of the + button on the PedalBox is enough to change the response of the throttle pedal and increase the power level of your car. Up to 31% increase in performance and a sporty throttle response at the push of a button, very comfortable from the vehicle interior.
The optimized response with our PedalBox is the perfect addition to chiptuning.
Our PedalBox with its Multi-Processor-System provides a noticeably better throttle response.
From sporty to economical - it is in your hand - at the push of a button!
With the PedalBox you can control your throttle pedal much better. The response of the engine develops much more dynamics - just as you dose it!
The most important feature for your safety. Our engineers have developed an ingenious control mechanism, the logic of which ensures mutual control of both processors. This reduces the risk of default by 1.000 times.
The optimized response with our PedalBox is the perfect addition to chiptuning.
Test report of the BMW 318d (F30)
BMW 318d (F30) with increased performance
We had the BMW 318d with it’s 4-cylinder engine with rear-wheel drive and an output of 143 hp. Once again, our engineers used all their skills and put them in the development of engine-specific software for the BMW 318d (F30). The result is more than satisfying.
Up to 29% more for the middle class diesel from ...
Best possible engine protection highest safety for your car
A software adapted to your car is the basis for a solid and safe chiptuning. With modern so-called digital additional control units (PowerBox from CPA) safety, environmental protection and performance increase are no longer in conflict.
The core task of secure chiptuning is to use the existing power reserves so that no additional wear takes place. Furthermore, the Engine Safe System of the PowerBox detects thermal overload in good time and regulates the power increase dynamically.
On our dyno cars with front-wheel drive, rear-wheel drive and all-wheel drive up to 1.100 Nm of torque can be measured.
At our tests, we always rely on extensive dyno tests including exhaust gas measurement and testing of the working temperatures of various engine parts. We use a set of external temperature sensors, which check and record the important operating temperatures of various engine parts with and without tuning. With new engines, intensive tests are always carried out at full load and with maximum power increase.
Activate the power of your car: Select car
For many years, we, the management and development team of CPA, have been developing and designing a variety of software and technical products. Now we have packed all this know-how and all our experiences into the PowerBox and PedalBox. We do not leave anything to chance.
We rely on experienced and award-winning engineers from the Stuttgart area.
Power increase and environmental protection are no longer necessarily in conflict with chiptuning of CPA Performance. If the torque is increased during power optimization, more feed than before can be achieved at low rpm. This leads to a partially enormous fuel saving.
Not only our development team has many years of racing experience, our management also has a lot of experience.
As CPA Chiptuning we strive for extraordinary performance! This is both a requirement and a motivation - for our company and our products. The management and development team at CPA Chiptuning can look back on more than 40 years of racing experience in motorsport. These included Formula 2 (EC), World Championship races in motorcycle racing, go-kart racing, Supermoto and most recently the national Superbike class. This racing experience is combined with detailed engineering work from the automotive region of Stuttgart. Every day we work passionately to strive for excellence. That is how our PowerBox came into being, into which we put all our heart and our expertise. Convince yourself.
About us
The BMW X6 M was tested at CPA Performance and on the dyno in order to achieve the suitable software for an increase in power of 100 PS and 140 Nm. Perfectly adapted chiptuning with the CPA PowerBox.
read more
The individual software development for a safe power increase with the CPA PowerBox for the BMW M5. With the CPA ConnectiveSystem, you can switch the power on and off as required.
read more
The long-term tests enable precise data acquisition and adaptation of the software to increase power for the BMW Active Tourer with CPA Performance. Test our products and see for yourself.
read more
We tested the BMW 530 D on the road and the test bench and developed engine-specific software that boosts the performance of your BMW up to 333 hp and 779 NM.
read more
Digital map with the PowerBox optimization of CPA. Stands for the classical chip tuning into nothing.
read more
Check out the PowerBox Ultra in your car. The result will inspire you. Convince yourself from the car specified software for your BMW 325d.
read more
